In home interior decoration, small details can have a significant effect on beauty; Often, one of the things that is ignored is the appearance of the door handle, which with the right choice can have a modern and beautiful design. Choosing the right door handle can not only add to the beauty and harmony of your decoration, but also improve the security and efficiency of your space. In this blog, we will examine the types of license plate door handles and introduce you to the important points in their selection and installation. Be with us so that you can choose the best and most stylish handles for your doors and create a safe and pleasant space for you and your family.

Types of license plate door handles

Plate door handles are a popular option for all types of doors due to their beautiful and integrated design. These handles can be divided into two main categories: simple license plate handles and license plate handles with locks. In the following, we introduce different types of license plate door handles.

1. Simple license plate handle

These types of handles have a simple design and are mostly used for interior doors such as bedroom and bathroom doors. They are often without locks and mostly have a decorative role.

2. License plate handle with key lock

These handles have a key lock in the lower part of the plate, which are suitable for entrance doors or doors that need more security. These locks often provide high security.

3. License plate handle with cylinder lock

These types of handles have a cylinder in the lower part of the plate that allows locking from both sides of the door. These locks are usually used in entrance doors or security doors and have higher security due to their more resistant design.

4. Bathroom and toilet license plate handle

These handles have a simple internal lock that can be easily opened and closed from the inside. These types of handles are suitable for bathrooms and sanitary services and provide the necessary security and privacy.

5. Lever license plate handle

These handles are designed as levers and are usually easy to use. Their ergonomic design is very suitable for people who need quick and easy access.

6. Digital license plate handle

These handles work with new technologies such as fingerprints, RFID cards or digital keyboards. These handles are very suitable for modern and security doors and provide advanced access control.

7. Classic license plate handle

These handles have traditional and classic designs and are suitable for old doors or classic decorations. They are usually made of high quality materials such as brass or bronze.

8. Modern license plate handle

These handles have modern and minimalist designs and are made of different materials such as stainless steel, aluminum or quality plastic. These handles are very suitable for modern decorations.

9. Double license plate handle

These types of handles are designed for doors that open and close on both sides, and are often used in commercial environments or large doors.

10. Fireproof license plate handle

These handles are designed for fire doors and are usually made of heat-resistant materials to maintain their functionality in the event of a fire.

Plate door handles are available in various types and designs according to different needs and different environments. From simple and classic handles to digital and modern handles, any type of handle can be chosen according to your needs and taste. Choosing the right handle not only adds to the beauty of the doors, but also provides better security and performance.

Step-by-step tutorial on installing the license plate door handle

Installing the license plate door handle (one-piece handle) is one of the important steps in completing the doors, which can be done easily by following the correct steps. In this guide, we introduce you to the main steps of installing the license plate door handle.

Required tools and equipment:

1. Number plate door handle

2. Screwdriver (four-sided and two-sided)

3. Drill

4. Suitable drills for wood

5. Handle screws

6. Measuring tape

7. Pen or pencil (for marking)

8. Adhesive tape (optional for better marking)

9. Hammer (if small adjustments are needed)

10. Small saw (if you need changes in the door)

Step 1: Preparation and measurement

1. First, remove the license plate door handle from the package and make sure that all the parts are available.

2. Using a measuring tape and a pen, mark the location of the handle on the door. Usually, the standard height for installing the handle is about 90 to 100 cm from the floor.

3. If the door already has a handle, check if the previous locations are suitable for the new handle or need to be changed.

Step 2: Digging the installation site

1. Using a suitable drill and drill, drill the marked places. Make sure that the holes are large enough to accommodate the screws and handle components.

2. After drilling, clean the holes of any dust or wood chips.

Step 3: Install the handle

1. Place the inner part of the handle in place. Make sure the holes are properly aligned with the holes created. Then, using a screwdriver, put the screws in place and tighten them.

2. Place the outer part of the handle on the door and make sure it is properly aligned with the inner part of the handle. Then fasten it with screws.

3. If your handle has a lock, put the lock cylinder in the right place and secure it with screws.

Step 4: Test and adjust

1. After installing the handle, open and close the door several times to make sure the handle works properly.

2. If needed, re-tighten the screws and make sure everything is installed correctly.

Final points:

Always read the instructions on the handle packaging as some models may require special steps.

Using the right tools and precision in measuring and drilling improves the quality of installation.

When using power tools such as drills, follow safety precautions to avoid any accidents.

By following these steps, you can install the license plate door handle correctly and successfully and ensure its functionality.

How to clean all types of license plate door handles

Cleaning all types of license plate door handles can help maintain their beauty and functionality. Each type of handle may require a special cleaning method to avoid damaging the surface. Below are the proper methods for cleaning license plate door handles of different materials:

1. Metal handles (steel, brass, bronze)

Necessary materials for cleaning:

Mild detergent solution (dishwashing liquid)

• •          Hot water

  • Soft cloth or microfiber

  • Soft toothbrush

  • White vinegar or alcohol

   

  Cleaning method:

  1. Mix a few drops of dishwashing liquid in a bowl of warm water.

  2. Dip the soft cloth in the detergent solution and gently rub it on the surface of the handle.

  3. Wash the cloth with warm water and run it over the handle again to remove the detergent solution.

  4. Wipe the handle with a dry cloth.

  5. To shine and disinfect, dip the cloth in white vinegar or alcohol and drag it over the handle.

   

  2. Wooden handles

  Necessary materials for cleaning:

  • Mild detergent solution

  •Hot water

  • Soft fabric

• Wood oil (such as lemon oil or mineral oil)

Cleaning method:

1. Dissolve mild detergent in warm water.

2. Dip the soft cloth in the solution and carefully rub it on the handle.

3. Wash the cloth with warm water and drag it over the handle to remove the detergent solution.

4. Wipe the handle with a dry cloth.

5. For shine and protection, pour some wood oil on the cloth and massage the handle with it.

3. Plastic or resin handles

Necessary materials for cleaning:

• Mild detergent solution

•Hot water

• Soft cloth or microfiber

Cleaning method:

1. Dissolve the detergent solution in warm water.

2. Dip the cloth in the solution and pull it on the handle.

3. Wash the cloth with warm water and pull it over the handle.

4. Wipe the handle with a dry cloth.

4. Glass or crystal handles

Necessary materials for cleaning:

• Mild detergent solution

•Hot water

• Soft fabric

• Alcohol

Cleaning method:

1. Dissolve the detergent solution in warm water.

2. Dip the soft cloth in the solution and carefully rub it on the handle.

3. Wash the cloth with warm water and pull it over the handle.

4. Wipe the handle with a dry cloth.

5. Dip the cloth in alcohol and rub it on the handle until it is shiny.

General points:

Avoid using strong or acidic detergents that may damage the surface of the handle.

ü  Always choose materials and cleaning methods according to the material of the handle.

ü  To maintain the beauty and function of the handles, perform regular cleaning.

By following these methods, your license plate door handles will always remain clean and beautiful.