K700 series Door Closer
Installation Instructions – Regular Arm Installation
Diagram A – by each body size: in (mm)

1

2 3

1. Using the measurements from diagram A, mark screw hole center locations. Mark our(4) location on door to mount door closer and two(2) locations on frame to mount arm shoe.
2. Drill pilot holes in door and frame, drill #14 all-purpose screws or drill and tap #7(.201? diameter) for 1/4-20 machine screws.
3. Install adjustable forearm/arm shoe to frame using screws provided.
4. Mount closer onto door using screws provided.
SPEED ADJUSTING VALVES MUST BE POSITIONED TOWARD HINGE SIDE.
5. Install main arm to top pinion shaft, perpendicular to door, Secure
tightly with arm screw/washer
6. Adjust length of forearm so that forearm is perpendicular to frame when
Assembled to preloaded main arm. Secure forearm to main arm with screw/washer provided.
7. Adjust door’s closing speed and power, see last page for reference.
8. Snap pinion cap over shaft at bottom of closer or install (optional) cover
with using small screw.

Installation Instructions – Top Jamb Installation

Diagram B – by each body size : in(mm)

4

5 6

1. Using the measurements from diagram B, mark screw hole center locations. Mark four (4) location on frame to mount door closer and two(2) locations on door to mount arm shoe.
2. Drill pilot holes in door and frame, #14 all-purpose screws or drill and tap #7(.201? diameter) for 1/4-20 machine screws.
3. Install adjustable forearm/arm shoe to frame using screws provided.
4. Mount closer onto door using screws provided.
SPEED ADJUSTING VALVES MUST BE POSITIONED TOWARD HINGE SIDE.
5. Install main arm to bottom pinion shaft, perpendicular to door, Secure tightly with arm screw/washer provided.
6. Adjust length of forearm so that forearm is perpendicular to frame when assembled to preloaded main arm. Secure forearm to main arm with
screw/washer provided.
7. Adjust door’s closing speed and power, see last page for reference.
8. Install (standard) cover with using small screw or snap pinion cap over shaft at top of closer.

Installation Instructions – Adjustment Chart

CAUTION!! Do not turn speed adjusting valve more than two (2) full turns counter-clockwise from its order not back the valves out of closer or a leak will result.

7

DOOR CLOSER SIZE
FULL TURNS OF POWER ADJUSTING SCREW
APPLICABLE
DOOR LEAF WIDTH
APPLICABLE DOOR WEIGHT

INTERIOR

EXTERIOR
(SWING OUT)

DOOR CLOSER SIZE FULL TURNS OF POWER ADJUSTING SCREW APPLICABLE APPLICABLE DOOR WEIGHT
DOOR LEAF WIDTH
INTERIOR EXTERIOR
(SWING OUT)
BF 5 lb*F
1 -6 32” (0.81m) 28”(0.71m) 33~66 LBS
(15~30Kg)
2 -4 36”(0.91m) 32”(0.81m) 66~99LBS
(30~45Kg)
3 0(PRE SET) 42”(1.07m) 36”(0.91m) 99~143LB
(45~55Kg)
4 5 48”(1.22m) 42”(1.07m) 143~187LBS
(65~85Kg)
5 9 54”(1.37m) 48”(1.22m) 187~264LBS
(85~120Kg)